Features

Adjustable top and bottom illuminated LED wrap counters from 0-7
Cycle pause feature
Top film over wrap control feature (TOC)*
Electronic film tension adjustment control on control panel
Independent up and down film carriage controls with jog up/down switch
Safety Photo-eye stops arm rotation as soon as the beam has been broken
Safety flashing light warns that machine is in operation
Carriage pause control
Manual control for rotary arm
Positive home position alignment
Micrologix 1200 PLC Control System using UL/CSA approved components
NEMA 1 electrical enclosurebr>
Guarding and Finish
Film carriage door disables the machine when open-preventing the carriage rollers or the machine from starting when the operator is changing the film roll
The Powder Coated paint system is standard on all Arpac Stretch equipment.

Options

Extended Wrap Diameters & Heights: Standard wrap height is 80", and standard wrap diameter clearance is 75"

Increase wrap diameter from 75" to 85" on standard 80" wrap height
Increase wrap height to 96" with standard 75" wrap diameter (includes auxiliary legs)
Increase wrap height to 96" and wrap diameter to 85" (includes auxiliary legs and counter weights)

Manual Roping Guide (Adjustable): Used for turning full web into a rope or band

AFTD (Automatic Film Tear Device): This device automatically tears film at the end of the cycle eliminating sharp objects from being used by operators to cut film

30" Film Carriage: Includes extended wipe arm assembly for 30" film

Cold Pack: Used where the pallet wrapper will be exposed to temps as low as 32ºF

Freezer Pack: Used where the pallet wrapper will be exposed to temps from 31ºF to -15ºF

Cycle Counter: A device that counts the actual cycles of the machine (resettable)

Internal Operator Controls: Allows the adjustable control buttons to be locked inside tower

Optional Input Voltages:

200V - 480V / 60HZ
200V - 480V / 50HZ

Machine Specs

Electrical Power Requirements
120V, 1Ph, 60Hz, 15A
Approx. Shipping Weight
2400 lbs

Product Spec

Note
Max. Load Weight: dependent on floor bearing
Load Height
up to 80 in
Load Capacity
0 and up lbs
Load Width
up to 53 in
Load Length
up to 53 in
Wrap Diameter Clearance
up to 75 in

Machine Layout

[please click]