Half-Slotted Type Boxes:
Consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided.
Slotted Type Boxes:
Consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided.
Telescope Type Box:
Consist of more than one piece and are characterized by a lid and/or bottom telescoping over the body of the box.
Folder Type Boxes & Trays:
Usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.
Slide Type Boxes:
Consist of several pieces of liners and sleeves sliding in different directions into each other. This group also includes outside sleeves for other cases.
Rigid Type Boxes:
Consist of two separate end pieces and a body and require stitching or glueing of fibreboard or wood.
Slide Type Boxes:
Consist of several pieces of liners and sleeves sliding in different directions into each other. This group also includes outside sleeves for other cases.
Partitions:
Interior fitments such as inside liners, pads, separators, dividers, etc. , whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.
Fold-Up Pads:
Interior fitments such as inside liners, pads, separators, dividers, etc. , whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.