Options

Machine Options Include but are not Limited to the following

Pneumatic Spindle Roll Stands for Quick Material Change Over
Power Unwind units for certain cohesive materials
Extended Infeed Tables and Exit Conveyors
Double Stop Option is Available for Easy Loading of Longer Products
Fold over opening device
Perforators for easy open packages
Pneumatic Spindle with both rolls mounted in the rear
Barcode Scanners
Print and Apply Label Applicators
Roll Printers or Coders

Machine Specs

[please click]

Notes

Machine Specification

The 9000 measures the length of the product and makes a package accordingly
The standard system comes with either a Flited/Lugged Infeed Conveyor or a Belted Infeed Conveyor
This machine uses two Rolls of Cold Seal Material to make the protective pouch.
The infeed conveyor carries the product to the sealing head where both rolls of material come together to form the protective pouch.
The end seals and length cutoff are done simultaneously in the sealing head of the system.
Machine operation and setup are done thru the touch screen controller.
This allows the operator to make adjustments quickly and easily.
The system is available in 12" , 18" , 24" and 36" Wide Models
The maximum Width and Height thru the machine varies upon Model
The 900-12 has a 2-1/2" High Package Capability
The 900-18 and the 900-24 have a 5" High Package Capability
While the 900-36 and the 900-24-8 have a 8" High Package Capability
Product lengths on a Flited infeed is limited the flite spacing (17" O.C. typical.
Products lengths are unlimited for the Belted infeed models.
Most all cold seal materials can be run on the series 9000, these include: Corrugated, Polyethylene, Kraft Papers, Foams, Bubble
The standard system has a 8' Infeed Table and a 3' Exit Conveyor
It uses 110 V.A.C. and 80 P.S.I.
The unit can run packages up to 35 packages per minute
Machine supplied with standard roll holders