PFH TENSIONER
PFH Tensioner is a manual tensior for strapping widths from 3/4 in. to 1 1/4 in. Product is a feed wheel, push type tensioner. This PFH Tensioner does require sealer.
| Description | Item No. | Sku | Weight | Qty. | Bulk Discount Savings | Quote | ||
| 5+ | 10+ | 20+ | ||||||
 SHSS 10-24 X 1/4 |
#30 | 1207 | 1.00 | EA | 15% | 25% | 30% | |
| BHCS, 10-24 x 3/8 |
#10 | 1727 | 1.00 | EA | 15% | 25% | 30% | |
| Strap Guide Pin |
#20 | 49 | 1.00 | EA | 15% | 25% | 30% | |
| Roll Pin, .093 x 1.000 |
#1 | 801 | 1.00 | EA | 15% | 25% | 30% | |
| Breaker Nose |
#21 | 1054 | 1.00 | EA | 15% | 25% | 30% | |
| Drive Pawl |
#2 | 1065 | 1.00 | EA | 15% | 25% | 30% | |
| Feedwheel Shaft |
#9 | 17327 | 1.00 | EA | 15% | 25% | 30% | |
| Pivot Pin |
#17 | 1056 | 1.00 | EA | 15% | 25% | 30% | |
| Wear Plug |
#24 | 1057 | 1.00 | EA | 15% | 25% | 30% | |
| Roll Pin, 1/4 x 7/8 |
#23 | 2020 | 1.00 | EA | 15% | 25% | 30% | |
| Lift Arm |
#19 | 1058 | 1.00 | EA | 15% | 25% | 30% | |
| BHSCS, 5/16-24 x 12 |
#12 | 1755 | 1.00 | EA | 15% | 25% | 30% | |
| Base Spring |
#26 | 1059 | 1.00 | EA | 15% | 25% | 30% | |
| Pinion Gear |
#6 | 1048 | 1.00 | EA | 15% | 25% | 30% | |
| Hold Pawl |
#14 | 1060 | 1.00 | EA | 15% | 25% | 30% | |
| Tension Gear |
#7 | 1049 | 1.00 | EA | 15% | 25% | 30% | |
| Feedwheel |
#18 | 1137 | 1.00 | EA | 15% | 25% | 30% | |
| Hold Pawl Spring |
#16 | 1061 | 1.00 | EA | 15% | 25% | 30% | |
| Bushing |
#8 | 1051 | 1.00 | EA | 15% | 25% | 30% | |
| Washer, 3/16 SAE |
#11 | 19278 | 1.00 | EA | 15% | 25% | 30% | |
| Pawl Pin |
#5 | 1062 | 1.00 | EA | 15% | 25% | 30% | |
| Tension Handle |
#4 | 1052 | 1.00 | EA | 15% | 25% | 30% | |
| SHCS M8-60 |
#66 | 19425 | 1.00 | EA | 15% | 25% | 30% | |
| SHCS, 1/4-28 x 3/4 |
#22 | 311 | 1.00 | EA | 15% | 25% | 30% | |
| Drive Pawl Spring |
#3 | 1063 | 1.00 | EA | 15% | 25% | 30% | |
| Base |
#28 | 1053 | 1.00 | EA | 15% | 25% | 30% | |
| Lock Wire |
#25 | 1064 | 1.00 | EA | 15% | 25% | 30% | |
| Gear Housing |
#15 | 39346 | 1.00 | 0 | ||||
| Nameplate |
#29 | 17329 | 1.00 | EA | 15% | 25% | 30% | |
| Bushing |
#31 | 197561 | 1.00 | EA | 15% | 25% | 30% | |
Solutions
- Types of Strapping: Which is Best for Your Application?
- Strike the Right Cord with Strapping
- Strapping Industry Terms
- Strapping Overview
- Strapping Terms
- How to Figure Out the Required Tensile Strength for Plastic Strapping
- Plastic Strapping
- Steel Strapping
- Safety Precautions
- How To Select The Proper Tool
- Strapping Joint Types
- How To Determine Number of Straps
- Seals and Buckles For Plastic Strapping
- Standard Seal Types
- Steel To Polyester Converstion
- Manual Tensioners for Plastic Strapping
- Manual Tensioners for Steel Strapping
- Equipment Installation
- Video: Demonstration of the BTS Battery Powered Sealer & PT Manual Tensioner
IPS Packaging is a proud member of Packaging Distributors of America.