TH34-114
This heavy duty feed wheel tensioner is built with need bearings for smooth tensioning as well as longevity of the product. For use with painted and waxed Magnus strap. TH 34-114 is used with a strapping width of 1 1/4" by 0.029"-0.035" thick.
| Description | Item No. | Sku | Weight | Qty. | Bulk Discount Savings | Quote | ||
| 5+ | 10+ | 20+ | ||||||
 RET PAWL SPR |
#47 | 113 | 1.00 | EA | 15% | 25% | 30% | |
| BHCS 1/4-28 X 1/4 |
#35 | 39517 | 1.00 | EA | 15% | 25% | 30% | |
| KNOB |
#13 | 519 | 1.00 | EA | 15% | 25% | 30% | |
| ROLL PIN 1/4 X 1 3/4 |
#12 | 520 | 1.00 | EA | 15% | 25% | 30% | |
| Drive Screw |
#27 | 15874 | 1.00 | EA | 15% | 25% | 30% | |
| BHCS 1/4-28 X 1/4 |
#30 | 11820 | 1.00 | EA | 15% | 25% | 30% | |
| CAUTION PLATE |
#23 | 15902 | 1.00 | EA | 15% | 25% | 30% | |
| HANDLE |
#1 | 1124 | 1.00 | EA | 15% | 25% | 30% | |
| HANDLE PAWL |
#4 | 1133 | 1.00 | EA | 15% | 25% | 30% | |
| HDLE PAWL SPR |
#5 | 1132 | 1.00 | EA | 15% | 25% | 30% | |
| PIN CROSSHEAD |
#6 | 304 | 1.00 | EA | 15% | 25% | 30% | |
| RATCHET GEAR |
#7 | 1131 | 1.00 | EA | 15% | 25% | 30% | |
| GEAR HOUSING ASSY |
#8 | 1123 | 1.00 | EA | 15% | 25% | 30% | |
| SHAFT |
#9 | 1125 | 1.00 | EA | 15% | 25% | 30% | |
| BUSHING |
#10 | 1127 | 1.00 | EA | 15% | 25% | 30% | |
| ROLL PIN |
#11 | 1288 | 1.00 | EA | 15% | 25% | 30% | |
| FEEDWHEEL |
#12 | 13976 | 1.00 | EA | 15% | 25% | 30% | |
| SPACER |
#13 | 1126 | 1.00 | EA | 15% | 25% | 30% | |
| SUPPORT PIN |
#14 | 1130 | 1.00 | EA | 15% | 25% | 30% | |
| RETAINING RING |
#15 | 407 | 1.00 | EA | 15% | 25% | 30% | |
| RT SUPP SPR |
#16 | 1129 | 1.00 | EA | 15% | 25% | 30% | |
| FD WHL SUPP SPR |
#17 | 13718 | 1.00 | EA | 15% | 25% | 30% | |
| RET PAWL PIN |
#18 | 1136 | 1.00 | EA | 15% | 25% | 30% | |
| LONG PAWL |
#20 | 1134 | 1.00 | EA | 15% | 25% | 30% | |
| SHORT PAWL |
#21 | 1135 | 1.00 | EA | 15% | 25% | 30% | |
| CLUTCH PLUG ASSY |
#22 | 1128 | 1.00 | EA | 15% | 25% | 30% | |
| BASE |
#24 | 17430 | 1.00 | EA | 15% | 25% | 30% | |
| SHSS, 1/4-28 X 5/8, FLAT POINT |
#25 | 198658 | 1.00 | EA | 15% | 25% | 30% | |
| HEX NUT (1/4-28) |
#28 | 197578 | 1.00 | EA | 15% | 25% | 30% | |
| BEARING BUSHING |
#29 | 39516 | 1.00 | EA | 15% | 25% | 30% | |
Solutions
- Types of Strapping: Which is Best for Your Application?
- Strike the Right Cord with Strapping
- Strapping Industry Terms
- Strapping Overview
- Strapping Terms
- How to Figure Out the Required Tensile Strength for Plastic Strapping
- Plastic Strapping
- Steel Strapping
- Safety Precautions
- How To Select The Proper Tool
- Strapping Joint Types
- How To Determine Number of Straps
- Seals and Buckles For Plastic Strapping
- Standard Seal Types
- Steel To Polyester Converstion
- Manual Tensioners for Plastic Strapping
- Manual Tensioners for Steel Strapping
- Equipment Installation
- Video: Demonstration of the BTS Battery Powered Sealer & PT Manual Tensioner
IPS Packaging is a proud member of Packaging Distributors of America.