Arpac 25TW-28 Tray Shrink Wrapper

SKU IPS-25TW-28
Tray Wrapper Shrink Packaging System
- +
Need a live product specialist?  Please call 800-277-7007

Specifications

Product Specifications
Length
7 to 20 in
Width
6 to 18 in
Height
4 to 12 in
Application Cans
Floor tiles
Glass bottles
Glass jars
Plastic bottles
Plates
Type Shrink Bundler

Application

Cans
Floor tiles
Glass bottles
Glass jars
Plastic bottles
Plates

Features

Features

Single frame welded steel construction designed for round the clock operation
Standard with left or right hand controls to suit your production layout
24" wide rubberized friction top Intralox single stage infeed conveyor
1-1/2 HP main drive motor with Allen Bradley PowerFlex 4
32"W x 16"H x 60"L single blower shrink tunnel with 1 HP motor
Central point lubrication (Nylon tubing) interconnecting all critical lubrication points
ARPAC designed coil heating elements contact more airspace for greater efficiency
Quick change, pull out tunnel heater assembly accessible from electrical cabinet.
Intralox 900 high temperature tunnel belt
Blower motor separated from turbine for cool operation and long motor life
Turbo cooling section at tunnel exit to aid film curing
Strong aluminum seal frame with high capacity, progressive damping shock absorbers
2 position height adjustment for product variations
28" seal bar with replaceable plasma coated aluminum seal bar inserts
Quick change single element seal bar with military type quick disconnect
Vertical motion controlled by Thompson shafting and chain.
Seal bar safety eye
24" powered seal conveyor with Intralox high friction belt.
Bottom mounted hot bar for operator safety
Top and bottom telescopic dual inline film racks accommodate 14" diameter film rolls
"No tools" film roll core chucks secure film roll during operation.
Top and bottom low inertia dancer bar system with ARPAC's original straight-through quick thread design
Upper and lower low film alert
NEMA 12 main electrical cabinet
Allen Bradley CompactLogix controller
Allen Bradley PanelView 600 Plus operator interface
Standard Allen Bradley electrical components
Soft start by AC frequency control
Circuit breaker protection (no fuses)
ARPAC operator interface

Guarding and Finish
All working areas are guarded with clear polycarbonate hinged doors with electrical interlocks.
Powder Coated Finish is Arpac Standard.

Machine Layout

Notes

Film Specifications
Film Roll Diameter
Question? up to 14 in
Max. Film Gauge
up to 6 mil
Film Type
Low density polyethylene (L.D.P.E.)
Max. Film Roll Width
27 in
Other Film Specifications
Clear or randomly printed

Options

Options
Options
25TW-28 Option, 36" infeed pacing conveyor
25TW-28 Option, Product guides for pacing conveyor
25TW-28 Option, Quick change seal cylinder kit for shorter seal opening (changes seal line height from 4-3/16" to 2-13/16")
25TW-28 Option, Side mounted film cradle with splice bar
25TW-28 Option, Spare parts kit
25TW-28 Option, Spare parts kit purchased within 14 days of machine order
25TW-28 Option, Testing of additional products when integrated into a system
25TW-28 Option, UL/CSA approved main electrical cabinet
25TW-28 Option, Auxiliary E-Stop
25TW-28 Option, Auxiliary operator interface
25TW-28 Option, Casters (do not use with jib crane)
25TW-28 Option, Jib crane with electrical hoist and yoke (do not use with casters)
25TW-28 Option, Low tension film assist
25TW-28 Option, Pneumatic product hold down
25TW-28 Option, Print Registration
Bridge Options
25TW-28 Option, Telescoping bridge for 2.5" long products
25TW-28 Option, Powered transfer bridge for 5" long products
Spare Part Kits
25TW-28-MIN, Model 25TW-28 Minimal Spare Parts Kit
25TW-28-STD, Model 25TW-28 Standard Spare Parts Kit
25TW-28-FULL, Model 25TW-28 Full Spare Parts Kit