ST TENSIONER
View PDF(s)This tensioner is a feedwheel tensioner for steel strapping between 3/8 and 3/4 of an inch. The feed-wheel tensioner has a serrated feed-wheel that engages the strapping firmly. This product does require the use of painted and waxed strapping.
Browse By Product
| Sku | Description | Lbs./ Ctn. | Qty./ Ctn. | Buy |
|---|---|---|---|---|
 48 |
Lock Wire | 0.00 | EA | |
| 49 |
Strap Guide Pin | 0.00 | EA | |
| 119 |
HANDLE PAWL SPR | 0.00 | EA | |
| 2855 |
CLUTCH PLUG (REP 086108) | 0.00 | EA | |
| 114 |
LONG RET PAWL | 0.00 | EA* | |
| 166 |
CAP SCREW | 0.00 | EA | |
| 120 |
FEED WHL SUP | 0.00 | EA* | |
| 3527 |
KNOB | 0.00 | EA | |
| 115 |
SHORT RET PAWL | 0.00 | EA* | |
| 2891 |
HANDLE (REPLACES 003493) | 0.00 | EA | |
| 121 |
FEED WHL PIN | 1.00 | EA | |
| 110 |
BEARING | 0.00 | EA | |
| 116 |
RET PAWL PIN | 1.00 | EA | |
| 122 |
HANDLE PAWL | 0.00 | EA* | |
| 111 |
FEED WHL SPR | 0.00 | EA* | |
| 117 |
FEED WHEEL SHAFT | 0.00 | EA* | |
| 123 |
HANDLE PAWL PIN | 0.00 | EA* | |
| 112 |
FEED WHEEL | 0.00 | EA* | |
| 118 |
RATCHET GEAR | 0.00 | EA* | |
| 124 |
BASE | 0.00 | EA | |
| 113 |
RET PAWL SPR | 0.00 | EA* | |
| 15884 |
NAME PLATE | 0.00 | EA* | |
| 39517 |
BHCS 1/4-28 X 1/4 | 0.00 | EA* | |
| 197573 |
BEARING BUSHING | 0.00 | EA | |
| 520 |
ROLL PIN 1/4 X 1 3/4 | 0.00 | EA* | |
| 11818 |
ST Feedwheel Tensioner | 4.00 | EA | |
| 15902 |
CAUTION PLATE | 0.00 | EA* |
Related Products
Solutions
- Types of Strapping: Which is Best for Your Application?
- Strike the Right Cord with Strapping
- Strapping Industry Terms
- Strapping Overview
- Strapping Terms
- How to Figure Out the Required Tensile Strength for Plastic Strapping
- Plastic Strapping
- Steel Strapping
- Safety Precautions
- How To Select The Proper Tool
- Strapping Joint Types
- How To Determine Number of Straps
- Seals and Buckles For Plastic Strapping
- Standard Seal Types
- Steel To Polyester Converstion
- Manual Tensioners for Plastic Strapping
- Manual Tensioners for Steel Strapping
- Equipment Installation
- Video: Demonstration of the BTS Battery Powered Sealer & PT Manual Tensioner