- 800-277-7007
- ISO 9001:2015 Certified Company
Combi TF-2 Fast Tray Former
SKU IPS-TF-2
TF-2 Fast Tray Former
The TF-2 is a perfect solution for forming and gluing die cut trays. The TF-2 fast tray former is a simple, intelligent and very compact system that utilizes the same transport mechanism as our E-series case erectors. The TF-2 tray former machine features a low-profile, gravity walk-in case magazine that makes it very easy to load trays. Only 4 easy adjustments are required for fast tray changeovers. A computer controlled glue application system applies glue precisely to the tabs at measurable intervals, creating a very square and securely glued tray, every cycle.
Need a live product specialist? Please call 800-277-7007Features
Features:
Heavy duty welded tubular steel framework with steel-it paint finish
Easy changeover with pre-set mandrels and crank adjustments
Nordson ProBlue hot melt glue unit with precise temperature control and energy saving timer
Easy load, gravity tray magazine
Self-cleaning vacuum system flushes the vacuum system every cycle, preventing corrugated dust buildup
Self-cleaning glue guns keep glue patterns tight and on target
Allen Bradley PLC Control with touch screen operator interface
Model: TF-2
Tray Size Min (L x W x H): 8½ x 8½ x 2" (216x216x51mm)
Tray Size Max (L x W x H): 24 x 16 x 5" (610x406x127mm)
Max Blank Size (L x W x H): 34 x 26" (864x660mm)
Machine Footprint (L x W x H): 6'2 x 6' x 4'11" (1880x1829x1499mm)
Speed TPM: up to 10
Heavy duty welded tubular steel framework with steel-it paint finish
Easy changeover with pre-set mandrels and crank adjustments
Nordson ProBlue hot melt glue unit with precise temperature control and energy saving timer
Easy load, gravity tray magazine
Self-cleaning vacuum system flushes the vacuum system every cycle, preventing corrugated dust buildup
Self-cleaning glue guns keep glue patterns tight and on target
Allen Bradley PLC Control with touch screen operator interface
Model: TF-2
Tray Size Min (L x W x H): 8½ x 8½ x 2" (216x216x51mm)
Tray Size Max (L x W x H): 24 x 16 x 5" (610x406x127mm)
Max Blank Size (L x W x H): 34 x 26" (864x660mm)
Machine Footprint (L x W x H): 6'2 x 6' x 4'11" (1880x1829x1499mm)
Speed TPM: up to 10
Machine Layout
Notes
Sequence of Operation:
An operator loads flat tray blanks into the gravity magazine. A vacuum arm extends to the tray blank, applies suction, retracts and then moves the fl at tray horizontally past two glue heads which apply a glue bead to the tray tabs. The glue application is controlled by magnetic position sensors which sense the tray position. After passing the glue heads, the transport arm extends and pushes the fl at tray blank into a mandrel, forming the tray and folding the tabs. At this moment, four small cylinders extend into the mandrel, one at each corner of the newly formed tray, applying pressure and securing the glue seal. The vacuum arm then retracts and returns to the home position to pull another blank.
An operator loads flat tray blanks into the gravity magazine. A vacuum arm extends to the tray blank, applies suction, retracts and then moves the fl at tray horizontally past two glue heads which apply a glue bead to the tray tabs. The glue application is controlled by magnetic position sensors which sense the tray position. After passing the glue heads, the transport arm extends and pushes the fl at tray blank into a mandrel, forming the tray and folding the tabs. At this moment, four small cylinders extend into the mandrel, one at each corner of the newly formed tray, applying pressure and securing the glue seal. The vacuum arm then retracts and returns to the home position to pull another blank.
Specifications
| Type | Tray Erectors |
|---|
Downloads
