- 800-277-7007
- ISO 9001:2015 Certified Company
Random Legend Case Sealer
SKU IPS-RANDOM-LEGEND
Loveshaw once again has set the standard! The Random Legend has a single mast, enclosed head lifting cylinder, head raising air switch and comes standard with extended side rails, and a roller in-feed table with integrated roller switch to operate rails.
Need a live product specialist? Please call 800-277-7007Benefits
Light touch head paddle
Patented leg extensions
Interchangeable tape cartridges
Patented safe mast trolley system
Reliable operation
Heavy duty steel construction
Light touch roller switch
Patented leg extensions
Interchangeable tape cartridges
Patented safe mast trolley system
Reliable operation
Heavy duty steel construction
Light touch roller switch
Features
Reliable Performance - Warranty:
1 Year All Components*
2 Years Gear Reducer
3 Years Cartridge*
*Moving and wear parts are not included. Other restrictions may apply.
Flexible:
Tapes boxes in a variety of sizes (see below)
Converts from 2" to 3" wide tape
Easy Operation:
Plug in operation
Minimal operator training required
Sealed drive system
CaseLocker ST® tape cartridge requires no lubrication
Front roller pack table
Extended drive smoothly pulls box into sealer
Dual light touch roller switch in pack table for centering and holding boxes during packing
Offset cartridge for enhanced box feed
Safe:
Patented single mast design allows clear access
Knife guard system of the CaseLocker ST® tape cartridge only allows the blade to be exposed only when the rollers have been depressed
Enhanced side rails for use at box packing station
1 Year All Components*
2 Years Gear Reducer
3 Years Cartridge*
*Moving and wear parts are not included. Other restrictions may apply.
Flexible:
Tapes boxes in a variety of sizes (see below)
Converts from 2" to 3" wide tape
Easy Operation:
Plug in operation
Minimal operator training required
Sealed drive system
CaseLocker ST® tape cartridge requires no lubrication
Front roller pack table
Extended drive smoothly pulls box into sealer
Dual light touch roller switch in pack table for centering and holding boxes during packing
Offset cartridge for enhanced box feed
Safe:
Patented single mast design allows clear access
Knife guard system of the CaseLocker ST® tape cartridge only allows the blade to be exposed only when the rollers have been depressed
Enhanced side rails for use at box packing station
Machine Layout
Options
Casters
Head limiter
Pneumatic pass through
Leg adjustments
High mast for box heights to 34"
Rear solid or roller pack table
Head limiter
Pneumatic pass through
Leg adjustments
High mast for box heights to 34"
Rear solid or roller pack table
Specifications
| Type | Semiautomatic Random |
|---|---|
| Specifications (long) | Power Requirements |
| 115 volts, single phase, 60 cycle (other voltage available) | |
| Operating Speed | |
| Continuous belt drive; 80' per minute (24.4 m/min.) (production rate depends on box size & operator dexterity) | |
| Weight | 275 lbs. (125 kg) uncrated |
| Closure Material | (pressure sensitive tape) |
| Width | 1-1/2" (38mm) to 2" (51mm) |
| Roll size | up to 15" (381mm) diameter |
| Case Capacity | (with 2" wide CaseLocker ST® Cartridge) |
| Minimum/ Maximum | |
| Height | 4-1/2" (114mm) Height |
| Width | 4-1/2" (114mm) Width |
| Length | 6-1/2" (165mm) Length |
| *Conveyor height minimum is 22-1/4" (565mm) | |
Downloads
