System Packaging Model 600 Cold Seal Machine

SKU ips-model-600
System Packaging Model 600 Cold Seal Machine. Model 600 is ideal for packaging batch or similar sized products in a three dimensional package. Products range from books, machine parts, crankshifts and automobile engine blocks. Model 600 can easily be set up to run flat packages as well.
- +
Need a live product specialist?  Please call 800-277-7007

Features

FEATURES
Available in 18" and 36" web widths
Manual or automatic operation with adjustable dwell time in the automatic mode
Dial in length control system - lets operator vary package length in 1/10" increments throughout the range of the machine
Operator can easily convert machine to package flat items
All head adjustments are motorized

Options

Machine Options Include but are not Limited to the following
Pneumatic Spindle Roll Stands for Quick Material Change Over
Power Unwind units for certain cohesive materials
Extended Infeed Tables and Exit Conveyors
Double Stop Option is Available for Easy Loading of Longer Products
Fold over opening device
Perforators for easy open packages
Barcode Scanners
Print and Apply Label Applicators
Roll Printers or Coders

Specifications

Type Equipment
Specifications (long) Machine Specification ~
This machine uses two Rolls of Cold Seal Material to make the protective pouch.
The lower web of the material runs over the infeed table and carries the product into the sealing portion.
This is where the Upper Roll of material joins the product to form the protective pouch.
The end seals and length cutoff are done simultaneously in the sealing head of the system.
The machine uses pre-set length counters to regulate the package size.
Machine operation and setup are done thru the touch screen controller.
This allows the operator to make adjustments quickly and easily.
The system is available in 18" and 36" Wide Models
The maximum Width and Height thru the machine varies upon Model
The 600-18 has a 5" High Package Capability
While the 600-36 has an 8" High Package Capability
Length thru the system is only limited by what can be supported on the Infeed Table
Most all cold seal materials can be run on the model 600, these include Corrugated, Polyethylene, Kraft Papers, Foams, Bubble

Downloads